2024 Generac MGG280N2 Gaseous Generator
$0.00
About Generac Mobile Products Gaseous Generators
Our gaseous generators provide cost effective power by using well gas byproduct as fuel. One gaseous generator can save an oil and gas site as much as $200K per year in diesel costs. And natural gas powered generators are seeing more use outside the oil field as well.
They come standard with a flexible engine management system, digital controller with paralleling capabilities, a durable, custom built trailer, a built-in fuel/water separator; and a sound attenuation package.
Our gaseous generators operate on well gas, natural gas or propane and are ready to be deployed for use as prime or backup power for a number of oil field operations, from well pumps to man camps. If you have off the grid power needs we have a product to fit your needs.
- Flexible engine management system
- Digital controller with paralleling capabilities
- Durable custom-built trailer
- Built-in fuel/water separator
- Sound attenuation package
- Oil Drain Extension
- Dual Stage Air Cleaner
- Stainless Steel Flexible Exhaust Connection
- Factory Filled Oil and Coolant
- Industrial Exhaust Silencer
- Air Filter Restriction Indicator
- Full Flow Gear Pump
- Oil Make-Up System with Floating Valve
- Oil Make-Up Tank 60L
- Close Coolant Recovery System
- UV/Ozone Resistant Hoses
- Factory Installed Radiator
- 50/50 Coolant (50% Ethylene Glycol)
- Radiator Drain Extension
- Automatic Changeover NG/LP
- Fuel Shutoff Solenoid
- Fuel Line NPT Connection
- Battery Disconnect Switch
- Solenoid Activated Starter Motor
- Full-Load Capacity Alternator
- Four Pole
- 2/3 Pitch
- Class H Insulation
- Permanent Magnet Generator (PMG) Excitation System
- Connection Luas
- Heavy Gauge Aluminum Sound Attenuated
- Enclosure
- Skid-Mounted
- High Performance Sound Absorbing Material
- Gasketed Doors
- Upward Facing Discharge Hood (Exhaust)
- Stainless Steel Hinges
- Internal Genset Vibration Isolation
- Wrapped Exhaust Piping
- Bottom (Floor) Power Cable Outlet
- Exhaust Silencer Mounted in Discharge Hood
- Three 7,000 lb (3,175 kg) Axles
- Electric Brakes
- 3 in (76.2 mm) Ring Hitch
- Transportation Tie Downs
- Safety Chains with Spring Loaded Safety Hooks
- Tongue Jack with Footplate - 10,000 lb (4,536 kg)
- Tires: 16 in (40.64 cm), 10-Ply, Tubeless
- Dot Approved Tail, Side, Brake, and Directional
- Lights; Recessed Rear Lights
- Illuminated License Plate Holder
- 1 Year or 2,000 Hours
- Make: PSI
- Cylinder #: 8
- Type: V
- Displacement: in (L): 892 (14.6)
- Bore: in (mm): 5.04 (128)
- Stroke: in (mm): 5.59 (142)
- Compression Ratio: 10.5:1
- Intake Method: Turbocharged / Aftercooled
- Connecting Rods: Steel Alloy
- Cylinder Heads: Cast Iron OHV
- Cylinder Liners: Cast Iron Alloy
- Ignition: Electronic
- Piston Type: Aluminum Alloy
- Crankshaft Type: Forged Steel Alloy
- Lifter Type: Solid
- Intake Valve Material: High-Temperature Steel Alloy
- Exhaust Valve Material: High-Temperature Steel Alloy
- Hardened Valve Seats: High-Temperature Steel Alloy
- Governor: Electronic
- Oil Pump: Gear
- Oil Filter Type: Twin Full Flow
- Engine Oil Capacity: qt (L): 32.7 (31)
- Cooling System Type: Pressurized Closed Recovery
- Fan Type: Pusher
- Fan Diameter: in (mm): 45 (1,143)
- Fuel Type: Natural Gas / Wellhead Gas/ Liquid Propane
- Carburetor: Down Draft
- Secondary Fuel Regulator: EPR
- Fuel Shutoff Solenoid: Standard (Dual)
- Engine Operating Fuel Pressure - in H20 (KPa): 7-11 (1.7-2.7)
- Inlet Gas Supply Pressure: TBD
- System Voltage: 24 VDG
- Battery Charger Alternator: Standard
- Battery Size: See Battery Index A0001839766
- Battery Voltage: 2x12 VDC
- Ground Polarity: Negative
Additional information
| ENGINE | Engine Type PSO 8 V |
|---|---|
| DIMENSIONS | Length 285 in. (7.25 m) |
