2024 Generac 250kVA/200KW Gaseous Generator 14.2l #MG200
$0.00
Powering Ahead
For over 50 years, Generac has provided innovative design and superior manufacturing.
Generac ensures superior quality by designing and manufacturing most of its generator components, including alternators, enclosures and base tanks, control systems and communications software.
Generac’s gensets utilize a wide variety of options, configurations and arrangements, allowing us to meet the standby power needs of practically every application.
Generac searched globally to ensure the most reliable engines power our generators. We choose only engines that have already been proven in heavy-duty industrial applications under adverse conditions.
Generac is committed to ensuring our customers’ service support continues after their generator purchase.
- Oil Drain Extension
- Heavy Duty Air Cleaner
- Fan Guard
- Stainless Steel flexible exhaust connection
- Critical Exhaust Silencer (Enclosed Only)
- Factory Filled Oil and Coolant
- Primary and Secondary Fuel Shutoff
- Fuel Line - NPT Connection
- Closed Coolant Recovery System
- UV/Ozone Resistant hoses
- Factory-installed Radiator
- 50/50 Ethylene glycol antifreeze
- Battery charging alternator
- Battery Cables
- Battery Tray
- Solenoid activated starter motor
- Rubber-booted engine electrical connections
- Class H insulation material
- 2/3 Pitch
- Skewed Stator
- Permanent Magnet Excitation
- Sealed Bearing
- Amortisseur winding
- Full load capacity alternator
- Internal Genset Vibration Isolation
- Separation of circuits - high/low voltage
- Separation of circuits - multiple breakers
- Wrapped Exhaust Piping (Enclosed Only)
- Standard Factory Testing
- 2 Year Limited Warranty (Standby rated units)
- 1 Year Warranty (Prime rated units)
- Silencer mounted in the discharge hood (Enclosed Only)
- Rust-proof fasteners with nylon washers to protect finish
- High performance sound-absorbing material
- Gasketed doors
- Stamped air-intake louvers
- Air discharge hoods for radiator-upward pointing
- Stainless steel lift off door hinges
- Stainless steel lockable handles
- Rhino Coat™ - Textured polyester powder coat paint
- Make: Generac
- Cylinder #: 6
- Type: Inline
- Displacement - L (Cu In): 14.17 (864.71)
- Bore - mm (in): 135 (5.31)
- Stroke - mm (in): 165 (6.50)
- Compression Ratio: 9.5:1
- Intake Air Method: Turbocharged/Aftercooled
- Number of Main Bearings: 7
- Connecting Rods: Carbon Steel
- Cylinder Head: Cast Iron GT250, OHV
- Cylinder Liners: Ductile Iron
- Ignition: Altronic CD1
- Pistons: Aluminum
- Crankshaft: Ductile Iron
- Lifter Type: Solid
- Intake Valve Material: Special Heat-Resistant Steel
- Exhaust Valve Material: Alloy Steel, High Temp
- Hardened Valve Seats: Alloy Steel, High Temp
- Governor: Electronic
- Frequency Regulation (Steady State): +/- 0.25%
- Oil Pump Type: Gear
- Oil Filter Type: Full-flow spin-on cartridge
- Crankcase Capacity - L (qts): 34.3 (36.2)
- Cooling System Type: Pressurized Closed Recovery
- Water Pump Flow - gpm (lpm): 92 (348)
- Fan Type: Pusher
- Fan Speed (rpm) 1581
- Fan Diameter - mm (in): 762 (30)
- Fuel Type: Natural Gas
- Carburetor: Down Draft
- Secondary Fuel Regulator: Standard
- Fuel Shut Off Solenoid: Standard
- Operating Fuel Pressure (Standard): 7” - 11” H2O
- System Voltage: 24 VDC
- Battery Charger Alternator: Standard
- Min. Recommended Battery Size: 1155 CCA
- Battery Voltage: (2) 12 VDC
- Ground Polarity: Negative
Additional information
| Engine | Engine Type Generac 6 cylinders Inline |
|---|---|
| Dimensions | Length 136 in. (3455 mm) |
